Rødvig Final Coat

Rødvig Final Coat
{{currentProduct.Color.ColorName}}
  GRAIN SIZE
QTY
Cost per unit

Total price
Store locator
Stock
In stock
Delivery
Delivery in 1-3 days
Pickup yourself
Pickup your order yourself See address and opening hours >>
Store locator

Rødvig Final Coat

Product Description

Rødvig Final Coat is a fine-grained lime mortar consisting of Rødvig Slaked Lime, Rødvig Jurassic Lime and Kronhøj Mortar Sand (0-0,3 mm).

Field of Application

Rødvig Final Coat is suitable for the final plastering of exterior building details such as cornices, which should have a strong surface and be crisply delineated.

Packaging

The mortar is delivered as a 2-component mortar. In 20-litre plastic buckets with hermetic lids, 7.6 kilos of Rødvig slaked lime mortar has been weighed 1:1 (0-0.3 mm). In an accompanying enclosed plastic bag, 7.2 kilos of Rødvig jurassic mortar has been weighed 1½:3 (0-0.3 mm). 

Additional Information

KALK A/S has been the market leader for many years with products used for renovation of conservation and listed buildings among others. The products can also be used for new construction because of the good physical properties of the material: 

  • Great flexibility in use
  • Great elasticity and adhesion
  • High tensile strength
  • Good porosity, which provides excellent insulation and moisture conditions

We have extensive experience in assisting clients in the use of our products. The technical guidance, which we can offer, merely serves to aid you with experiences. Therefore, we do not take on the responsibility of being planning technicians. With regards to renovation work, we can refer to technicians who are familiar with renovation work on buildings worthy of preservation.  

 

 


Guidance

Mixing

We deliver Rødvig final coat as a 2-component mortar. In 20-litre plastic buckets with hermetic lids, 7.6 kilos of Rødvig slaked lime mortar has been weighed 1:1 (0-0.3 mm). In an enclosed plastic bag, 7.2 kilos of Rødvig jurassic mortar has been weighed 1½:3 (0-0.3 mm). Mix the Jurassic mortar with the Rødvig slaked lime mortar in the bucket, and add the desired amount of water. During the mixing, the final coat is created in the ratio 1:1½:4 (0-0.3 mm).

Execution

When cornices and such have been straightened as evenly as possible with the coarse Rødvig Jurassic mortar KKh 20/80/475, you can finish off with the final coat. It is applied in very thin layers so that the above-mentioned mixture can cover a cornice of approx. 15-20 metres.

Limitations of Use

The mixed final coat should be used within approx. 2 hours.

If there are many cracks in the plaster layer, final coat or paint should not be applied here as this very well could cause this layer to crack, corresponding to the cracks in the foundation. In those cases, it would be necessary to change the plaster layer.

Storage

Final coat is stored in a dry and frost-free place.

 

Safety Data Sheet

You can find the safety data sheet for Rødvig Final Coat by clicking on the image below.